home *** CD-ROM | disk | FTP | other *** search
/ EnigmA Amiga Run 1995 November / EnigmA AMIGA RUN 02 (1995)(G.R. Edizioni)(IT)[!][issue 1995-11][Skylink CD].iso / earcd / docs / lwml9505.lha / LWML9505.TXT / 000401_owner-lightwave@webcom.com_Tue May 30 21:51:51 1995.msg < prev    next >
Internet Message Format  |  1995-06-03  |  2KB

  1. Received: by webcom.com
  2.     (1.37.109.15/16.2) id AA007019960; Fri, 26 May 1995 10:39:21 -0700
  3. Return-Path: <owner-lightwave@webcom.com>
  4. Received: from netcom18.netcom.com by webcom.com with ESMTP
  5.     (1.37.109.15/16.2) id AA006939952; Fri, 26 May 1995 10:39:12 -0700
  6. Received: by netcom18.netcom.com (8.6.12/Netcom)
  7.     id KAA20052; Fri, 26 May 1995 10:41:19 -0700
  8. Date: Fri, 26 May 1995 10:41:18 -0700 (PDT)
  9. From: John Gross <jgross@netcom.com>
  10. Subject: Re: Stencil
  11. To: Manuel Coats <mcoats@qnet.com>
  12. Cc: lightwave@webcom.com
  13. In-Reply-To: <Pine.SV4.3.91.950525233641.28617C-100000@cello>
  14. Message-Id: <Pine.3.89.9505261042.A19013-0100000@netcom18>
  15. Mime-Version: 1.0
  16. Content-Type: TEXT/PLAIN; charset=US-ASCII
  17. Sender: owner-lightwave@webcom.com
  18. Precedence: bulk
  19.  
  20. > On Thu, 25 May 1995, John Gross wrote:
  21. > > Remember, if you are just stencilling fonts onto polys, there's no need 
  22. > > to extrude the font. By using Drill (not Solid Drill) you can stencil (or 
  23. > > any of the other operations) along any axis. The stencil fonts don't even 
  24. > > have to be touching the "cutee". Of course, if you are stenciling into 
  25. > > something not lined up on X, Y or Z, then you would want to extrude and 
  26. > > intersect like Joe mentioned...
  27.  
  28. > Manuel Coats wrote:
  29. > This is not entirely correct.  By doing the above, the cutee would be 
  30. > stenciled though the entire object.  If you only want the logo stenciled 
  31. > on one side of the object you will need to use the extruded cutee and 
  32. > use solid drill.
  33.  
  34. No. All you have to do is select the polygon(s) that you want the cutter to 
  35. cut. There is no need to extrude the cutter. This is true in any boolean 
  36. operation. By selecting just those polys that you want to be effected by 
  37. the operation will speed things up and keep any drills from going thru...
  38. sorry I forgot to mention this...
  39.  
  40. JG
  41. --
  42. John Gross <jgross@netcom.com> sent this message.
  43. To Post a Message           : lightwave@webcom.com
  44. Un/Subscription Requests To : lightwave-request@webcom.com
  45. (DIGEST)                 or : lightwave-digest-request@webcom.com
  46. Administrative Items To     : owner-lightwave@webcom.com